Course Search Results

  • ME EN 1020: Appl Eth & Prof for ME

    1.00 Credits
    University of Utah

    This course provides the student with a brief applied understanding of societal ethics, engineering ethics and personal morals. Steps and procedures in ethical decision making are presented. Famous engineering ethical cases are analyzed to identify common reasons individuals behaved unethically. Tools for how to protect oneself in ethical situations are discussed. Some principles of engineering professionalism are also covered. Prerequisites: Major status in Mechanical Engineering AND NOT on ME Advising Hold
    ShareME EN 1020 - Appl Eth & Prof for ME

  • ME EN 1800: Success in Mech Engin

    1.00 Credits
    University of Utah

    A seminar-style course designed to introduce first-year Pre-Mechanical and Mechanical Engineering students to the major and develop skills for a successful college experience. Topics include time management, exam preparation, study skills, campus resources, mechanical engineering research areas, emphases, major requirements and community building. Prerequisites: Major status in Mechanical Engineering
    ShareME EN 1800 - Success in Mech Engin

  • ME EN 2010: Statics

    3.00 Credits
    University of Utah

    Analysis of particles and rigid bodies using vector statics. Topics include: vector operations; forces, moments, couples, and resultants; static equilibrium in two and three dimensions; statically equivalent force systems; trusses, frames, and machines; centroids, distributed loads, and moments of inertia; free body method of analysis; friction; and internal forces and bending moments in structural members. Prerequisites: 'C' or better in (MATH1210 /1215 /1250 /1310 /1311 /AP CalcAB score 4+ /AP CalcBC score 3+) AND Major status in Engineering Corequisites: (MATH1220 /1260 /1320 /1321 /AP CalcBC score 4+) AND (PHYS 2210 /3210 /AP PhysC:Mech score 4+)
    ShareME EN 2010 - Statics

  • ME EN 2030: Dynamics

    3.00 Credits
    University of Utah

    Kinematics and kinetics of particles and rigid bodies, including: position, velocity, acceleration, moving frames of reference, Newton's laws, conservation of energy and momentum, impact, and an introduction to vibrations. Prerequisites: 'C' or better in ((ME EN 2010 OR CVEEN 2010) AND (PHYS 2210 OR 3210)) OR AP Physics C:Mech 4+) AND Major status in ME EN, CVEEN, OR MET E Corequisites: 'C' or better in MATH 2250 OR (2270 AND 2280)
    ShareME EN 2030 - Dynamics

  • ME EN 2050: Found of Microsystems

    1.00 Credits
    University of Utah

    This course will provide a 'hands-on' introduction to the world of micro- and nano- systems for mechanical, electrical, chemical, materials, and bioengineers. It's an opportunity to build devices in the 'machine shop of the future.' The course is a sequence of lectures and laboratory sessions that will allow beginning engineering students to understand the wealth of existing applications and future inventive possibilities made possible at the micrometer and nanometer scale. Prerequisites: (MATH 1210 OR 1215 OR 1250 OR 1310 OR 1311) OR AP Calc AB score of 4+ OR AP Calc BC score of 3+ OR AP Physics C Mech score of 4+ Corequisites: 'C' or better in PHYS 2210 OR PHYS 3210
    ShareME EN 2050 - Found of Microsystems

  • ME EN 2300: Thermodynamics

    3.00 Credits
    University of Utah

    Thermodynamic properties, open and closed systems, equations of state, heat and work, first and second laws of thermodynamics. Carnot cycles, reversibility, and entropy changes. Gas power, vapor power, and vapor compression refrigeration cycles, and more advanced topics such as jet-propulsion cycles and turbocharged engines, gas mixtures and air-conditioning, or combustion and chemical equilibrium. Prerequisites: 'C' or better in (MATH 2250 OR 2270) AND (PHYS 2210 OR 3210 OR AP Phys C:Mech score of 4+) AND Major Status in Mechanical Engineering AND ME EN 2-5XXX Eligible (See Admission Requirements) AND NOT ME Advising Hold
    ShareME EN 2300 - Thermodynamics

  • ME EN 2450: Num Methods for Eng Sys

    3.00 Credits
    University of Utah

    Basic techniques for the modeling and numerical solution of problems in engineering with an emphasis on integrated systems design. Topics covered include: root finding, interpolation, approximation of functions, integration, differential equations, direct and iterative methods in linear algebra, and curve fitting. Prerequisites: 'C' or better in ((ME EN 1010 OR CH EN 1703) AND (MATH 2250 OR (MATH 2270 AND MATH 2280))) AND Major Status in Mechanical Engineering AND ME EN 2-5XXX Eligible (See Admission Requirements) AND NOT ME Advising Hold
    ShareME EN 2450 - Num Methods for Eng Sys

  • ME EN 2455: Prgmg for Model & Simul

    1.00 Credits
    University of Utah

    The primary goal of this lab is to provide hands on practical experience developing numerical codes to solve engineering problems individually and in teams. Prerequisites: Major status in Mechanical Engineering AND ME EN 2-5XXX Eligible (See Admission Requirements) AND NOT ME Advising Hold
    ShareME EN 2455 - Prgmg for Model & Simul

  • ME EN 2550: Prob & Stats for Eng

    3.00 Credits
    University of Utah

    The purpose of this course is to introduce mathematical concepts and statistical methods used in modern engineering analysis. The goal is to introduce students to analytical and numerical tools that can be used to solve real world engineering problems. Lectures will be supplemented by several programming exercises using R and/or Matlab, and a large number of practical examples on relevant engineering topics. This course covers the role of statistics in engineering, probability theory and distributions, continuous random variables, random sampling, data description, and statistical analyses or a single sample, and common hypothesis testing. Prerequisites: 'C' or better in (ME EN 1010 OR CH EN 1703) AND (MATH 1220 OR 1260 OR 1320 OR 1321 OR AP Calc BC score 4+) AND Major Status in Mechanical Engineering AND ME EN 2-5XXX Eligible (See Admission Requirements) AND NOT ME Advising Hold
    ShareME EN 2550 - Prob & Stats for Eng

  • ME EN 2650: Manufact for Eng Sys

    3.00 Credits
    University of Utah

    Introduction to various manufacturing processes (both traditional and non-traditional), with an emphasis on mechanical and thermal based manufacturing processes (material removal (machining), material forming (bulk deformation and sheet metal forming), casting, polymer manufacturing, composites manufacturing, welding, additive manufacturing, micro- and nano-manufacturing, and quality control). Importance of manufacturing economics and its relation to engineering/manufacturing framework. Prerequisites: 'C' or better in (ME EN 1000 OR CVEEN 1000) AND (ME EN 2010 OR CVEEN 2010) AND Major Status in ME AND ME EN 2-5XXX Eligible (See Admission Requirements) AND NOT ME Advising Hold Corequisites: 'C' or better in MSE 2010 OR MSE 2160
    ShareME EN 2650 - Manufact for Eng Sys